Wednesday, April 23, 2014

FORTA® Career Opportunities



2014 represents the 36th year in the fiber reinforcement business for FORTA® Corporation of Grove City, Pennsylvania.  As the first of its kind, FORTA® has developed, produced, and promoted a complete family of synthetic fiber reinforcements for a wide variety of concrete applications.  These fibers have involved FORTA® in projects ranging from precast vaults, tanks, and wall panels, to site-cast floors, parking lots, and bridge decks.  These products and projects have helped change the face of concrete reinforcement worldwide.
FORTA® is currently recruiting Independent Sales Representatives for the following territories:
  • New England
  • New York City
  • Northern California
  • Tennessee
  • Mississippi/Louisiana
  • Northern Texas/Oklahoma
  • South Texas
  • Oregon
  • Idaho/Montana/Wyoming

This is a 100% commissioned sales representative position.  You will be responsible for your own expenses.  However, you will benefit from an industry-leading commission program, as well as product, technical, sales and engineering support.  We offer an excellent training program to introduce you to the wide variety of products and services.

Friday, April 11, 2014

Slab on Ground Concrete





The 5” thick slab on ground for the Yuma Federal Courthouse expansion posed a considerable number of construction issues for the engineers, designers, concrete supplier, and contractors.  For a variety of reasons, measures to reduce shrinkage and the resulting cracking were paramount in many construction areas.  With day-time temperatures reaching 100 degrees F in windy conditions, pours were adjusted to a night-time schedule requiring three all-night placements.  

The slab also contained myriad areas of cut-outs, slab protrusions for water and electrical conduits, and many slab interruptions for walls, small rooms, and offices.  The 3,500 psi concrete design was also optimized to reduce the tendency for shrinkage by increasing coarse aggregate size and using a relatively low cement content, thereby maintaining a low W/C ratio.  One of the key shrinkage-reducing measures was the use of a high dosage of macrosynthetic fiber reinforcement in lieu of conventional temperature-steel reinforcement, which offered a uniform three-dimensional non-corrosive way to reduce cracking.  

FORTA-FERRO® macro fiber was used at a dosage of 7.0 lbs/cu yd in approximately 30,000 square feet of floorslab, requiring over 450 cubic yards of concrete.  In addition, FORTA-FERRO® was used successfully in 1,300 square feet of slab on metal deck construction, and dramatically reduced cracking found in other similar deck placements that had been placed previously.  Even at the high dosages, the macro fiber mixed, distributed, pumped and finished extremely well throughout, offering a cost-effective and labor-free alternate to conventional temperature reinforcement.  

Project Details:
Owner:  United States Federal Courthouse, Yuma, AZ
Design & Construction Manager:  General Services Administration, Design and Construction Division, Region 9, San Francisco, CA
Project Manager:  Abacus Project Management, Inc., Phoenix, AZ
Structural Engineer:  Caruso Turley Scott Inc., Tempe, AZ
Design/Build Contractor:  Sundt Construction, Tempe, AZ
Concrete Consultant:  Structural Services LLC, Atlanta, GA
Mix Design Consultant:  Geotechnical Testing Services Inc., Yuma, AZ
Ready-Mix Supplier:  BLT Ready Mix, Yuma, AZ
Pumping Contractor:  BLT Ready Mix, Yuma, AZ
Fiber:  FORTA-FERRO® macro-synthetic 2 ¼” @ 7.0 lbs/cu yd

For more information, please visit: www.forta-ferro.com

Friday, April 4, 2014

The Benefits of Synthetic Fiber vs. Wire Mesh



In the March 20, 2014  edition of ForConstructionPros.com. published an article "Not Meshing Around." The article discuss the safety benefits of using synthetic fiber in concrete projects versus wire mesh on job sites.

In the past construction of slabs on metal deck involved the use of a concrete slab with a supporting platform made up of structural steel beams and a metal deck.  Historically, a typical steel deck consisted of a corrugated steel sheet with a concrete topping reinforced with welded wire mesh.  The purpose of the wire mesh is to act as a secondary (non-structural) reinforcement to prevent concrete cracks.

The present day now offers the use of synthetic fibers, primarily macro-synthetic fibers, as a more effective way to reduce and control cracking.  Synthetic fibers meet and exceed established standards and business codes established by the Steel Deck Institute (SDI), Underwriters Laboratories (UL), American Society of Testing and Materials (ASTM) and the American Concrete Institute (ACI).  Beyond the cost savings and reduction or prevention of cracking is the time and labor savings by simply adding synthetic fibers to the concrete mix.

In addition to the benefits of synthetic fiber in the concrete mix as a cost-effective solution is they also eliminate any head aches when is comes to removing potential hazards from the work site.  Synthetic fibers offer a safer alternative to placing and working with wire mesh for construction workers.  Using synthetic fiber eliminates worry of injury to workers for construction businesses and project foremen.

Biddle, Daniel T. "Not Meshing Around." ForConstructionPros.com. March 20,2014

Friday, March 28, 2014

Ground and Polished Concrete


Macrosynthetic fibers played an important reinforcing role in the $9 million expansion project at the Erie Art Museum in Erie, PA. The museum owner's desire for an eye-catching and joint-free floor surface for their 10,000 sq. ft. addition prompted concrete contractor Tom Maya to submit high-volume macrosynthetic fibers as an alternate to the specified matt-steel reinforcement. Based on previous macro-fiber experiences, Maya felt fibers offered the best opportunity to minimize joints and cracking on the high-profile gallery floor.

Critical to success however, would be the fibers' ability to mix and distribute uniformly and finish well, even at the high dosages required (7.5 lbs.cu.yd.), while not affecting the aesthetics of the grind-and-polish surface treatment. While the results speak for themselves, the FORTA-FERRO® macrosynthetic fiber succeeded in controlling shrinkage, cracking, and curling in the large and irregularly shaped joint-free floor sections. The final floor finish was impressive enough to cause concern by museum curators that the floor might actually divert attention from the gallery exhibitions. 

The floor system included a 1 1/2" thick fiber-reinforced mud matt required due to poor sub-grade conditions, and topped with a 5" thick concrete floor separated by a double slip-sheet to allow for possible movement. The floor was comprised of a 3,000 psi high-performance exposed-aggregate concrete, that involved a 5-step grind-and-polish process. Grinding contractor Diamond Designer Concrete of Erie plans to use the project as a showcase reference for their fiber-reinforced, polished-floor system. 

For more information, please visit: www.forta-ferro.com

Friday, March 21, 2014

Decorative Concrete


Typically decorative concrete contractors shy away from the use of the second generation macro synthetic fibers for use in stamped and decorative concrete for fear of having visible fibers on the surface after completion. Recently a contractor who uses the FORTA-FERRO® macro fibers in his standard slab-on-grade projects had a stamped concrete patio project come up and he wanted to test the FORTA-FERRO® for finish ability in this application. 

A dosage of 7.5 lbs. per cubic yard of 2 ¼” length FORTA-FERRO® was chosen in this 4” thick, 5 yard stamped concrete slab. The surface of the integral colored concrete was first striked off and then 2 different shake colors were then applied to the surface, after which the surface was bull floated and lastly a Fresno was used. Once this was complete the shake hardener was applied. 

The end result after pressure washing the surface was a fiber-free surface on the stamped concrete patio. Many stamped concrete contractors use micro fibers for the main reason they do not show on the surface. This patio shows that macro synthetic fibers, which offer better hardened concrete benefits, will also yield excellent results when it comes to the visual finish of the decorative concrete.

Project Details:
Application: Decorative Patio
Owner: Private Residential
Location: Grove City, PA
General Contractor: Ron Minor – Minor Industries, Stoneboro, PA
Concrete Contractor: Ron Minor – Minor Industries,Stoneboro, PA
Ready-Mix Supplier: R.W. Sidley, Pennsylvania
Fiber/ Dosage: FORTA-FERRO® 2 1/4” 7.5 lbs. /CY

For more information, please visit: www.forta-ferro.com

Friday, March 14, 2014

Slab on Grade



Stephen Scibetta, Concrete Contractor, for Design Concrete Inc. completed a project for Chik-fil-A Dwarf House in Forest Park, GA.  The project was replacing a portion of a failed asphalt parking lot.  Scibetta specified 3lbs per cubic yard of FORTA-FERRO® in a 6” slab on grade concrete application.


Project Details:
Application: Slab on Grade
Owner: Chik-fil-A
Location: Forest Park, GA
Concrete Contractor/Specifier: Stephen Scibetta, Design Concrete Inc.
Concrete Supplier: Walker Concrete
Fiber Reinforcement: FORTA-FERRO® 3lbs per cubic yard



For more information, Please visit: www.forta-ferro.com

Friday, March 7, 2014

Make the Switch to Macro Synthetic Fiber



Many companies are reinforcing their concrete projects with FORTA-FERRO® macro synthetic fibers.  FORTA-FERRO® was developed in the late 90's as an alternate to traditional steel.  FORTA-FERRO® has become a leading macro synthetic fiber for secondary reinforcement for concrete because of its superior mixing and finishing characteristics.

Traditional wire mesh has been used since the early 1900's as a way to hold broken pieces of concrete together.  Due to the difficulties of placing wire mesh in the top-third of the concrete cross section, the wire mesh does not get the chance to aid in holding broken pieces of concrete together.   Other potential issues with using labor intensive wire mesh are: delivery, storage, corrosion and cost.

The wire reinforcement institute states, "Only when the reinforcing steel is properly selected, placed and supported can its use be recommended and it's cost warranted."

FORTA-FERRO® is a three dimensional reinforcement fiber that eliminates the need for concern if steel reinforcement is placed in the proper location.  FORTA-FERRO® is chemically inert, so it will not corrode like steel.  In most instances macro synthetic fibers will also save time and labor costs versus steel.

Let FORTA® Corporation show you how FORTA-FERRO® can be a better alternative for your next concrete pavement or interior concrete slab project.  FORTA® offers engineering services, as well as a seasoned and knowledgeable field team nationwide to assist you. 

Contact FORTA® Corporation to reach a local representative:

1-800-245-0306

For more information, Please visit: www.forta-ferro.com